|
|
||
|
When a print job is sent to the printer, the printer will display processing job on the control panel, and will continually ramp up and down attempting to print the job. After several minutes the printer will return to ready without posting any error messages. Occasionally, after several minutes the print job will print.  The Hewlett Packard LaserJet P3005 commonly suffers from noises from the back of the printer. These can range from a rhythmic rumbling noise to a loud grinding or clicking noise. It’s caused by either the fuser or the fuser drive gears. A grinding noise and paper jamming at the fuser in a Hewlett Packard LaserJet 5 is more than likely caused by the drive train gear cluster. Image ghosting (image repeating itself down the page) on a Hewlett Packard Color LaserJet 2600 when first switched on or after it has been idle for several hours can be cured by a simple firmware update. This was an interesting fault. The paper fed normally from tray 1, the multi-purpose tray at the front. When trying to feed from cassette tray 2, the printer would run for about one minute and fifteen seconds before the paper was picked up and fed into the printer. It took around five or six seconds to pick the paper up from tray 1. |
||
|
Entries (RSS) and Comments (RSS). |
||