Hp | Printer Repair Tips

HP LaserJet P4014, P4015 and P4515 Printer Series - Slow printing or No printing from Tray 2

When a print job is sent to the printer, the printer will display processing job on the control panel, and will continually ramp up and down attempting to print the job. After several minutes the printer will return to ready without posting any error messages. Occasionally, after several minutes the print job will print.

HP LaserJet 4100 - 68.0 PERM STORE WRITE FAILED

68.0 PERM STORE WRITE FAILED on a Hewlett Packard LaserJet 4100 can be repaired without replacing the formatter board. This error isn’t mentioned in the service handbook or on the HP website.

HP LaserJet 4200 4300 4250 4350 - Printing Blank Or Faint Pages

Very faint print, or blank pages, on a HP LaserJet 4200/4300/4250/4350 can be caused by the toner cartridge earth contact on the left hand side of the printer frame coming out of place. You might also notice that the toner cartridge doesn’t seem to sit properly in the printer.

HP LaserJet P3005 - Noisy, Grinding, Clicking - Update

If your Hewlett Packard LaserJet P3005 suffers from the worn fuser bush problem, HP will send out an engineer and repair it free of charge.

HP Color LaserJet 3000 3600 3800 - 10.92 Cartridges Not Engaged

The most common cause of a 10.92 cartridges not engaged error on a Hewlett Packard Color LaserJet 3000 / 3600 / 3800 is broken cartridge locks on the right hand side of the printer. Another possibilty is the slide lever that operates the cartridge locks is broken.

HP Color LaserJet 2600 - Image Ghosting Or Repeating Down The Page

Image ghosting (image repeating itself down the page) on a Hewlett Packard Color LaserJet 2600 when first switched on or after it has been idle for several hours can be cured by a simple firmware update.

HP Color LaserJet 2605 - Colours Out Of Alignment

HP Color LaserJet 2605 – colors out of alignment.
The symptons of this fault is that the colours appear to be out of alignment. If you look closely at a printout, you will see it is actually the black that is shifted horizontally and the other colours are ok.

HP LaserJet 4250 4350 - Grinding And Knocking Noise

If you get a grinding and knocking noise from a HP LaserJet 4250 or 4350, the problem is the swing plate assembly and / or fuser. The swing plate assembly is a metal bracket with two plastic gears on it and drives the fuser.

HP LaserJet P3005 - Does Not Initialise

This is a common fault with the HP LaserJet P3005. When you turn the printer on, it will hang either at the memory count or with the HP logo on the control panel display. It might also have a blank display or show a DIMM error.

HP LaserJet P4015 - Not Picking Up Paper

This was an interesting fault. The paper fed normally from tray 1, the multi-purpose tray at the front. When trying to feed from cassette tray 2, the printer would run for about one minute and fifteen seconds before the paper was picked up and fed into the printer. It took around five or six seconds to pick the paper up from tray 1.

Printer Repair Tips

Categories

Archives